Dual Fuel Range Cooker With 13amp Plug
Are you a cook at home who appreciates the nimble heating control of gas cooktops but wants an electric oven to bake? Discover a dual fuel range cooker that has the best of both worlds.
Gas cooktops are the preferred choice of many home chefs with expertise in the kitchen due to their superior temperature control. They also allow the use of advanced cooking techniques like charcoaling. These powerhouse stoves can be costly though, especially when you need an additional gas hook-up and electrician to install it.
What is a 13amp plug?
If you own a dual fuel range cooker (also called an electric and gas oven), then you'll need an appropriately rated 13 amp plug. The plug also needs to be wired hard into the cooker circuit using a certified electrician.
This ensures that the flow of current through the plug will not exceed the limit of safety, which could lead to an electrical fire. The plug is equipped with an electric fuse that regulates the current. The fuse will blow when it is deemed to be overloaded. This safeguards the appliance from overloads of electricity.
The fuse is rated 13 amps, which is shown on top of the plug. This indicates the maximum amount of current the plug could carry without damaging the appliance or heating the socket. It is important to ensure that when replacing fuses, you always use the same amperage as the original. If you replace the fuse with one of an alternative rating, you risk overheating the socket, and potentially putting you and others at serious risk.
Ceramic 13 amp fuse are extremely durable, and can withstand high temperatures that can be generated by a range cooker. The ceramic element is also fire-proof, which makes it a better option than other types of fuse.
There are many ways to install an 13 amp plug. It could be wired to an existing live socket, and the flex is then connected to it using either a screw or a jaw type cord clamp. The clamp must be tightened after the plug has been securely pushed into position.
Some plugs will include a wiring diagram on cardboard over the pins, and these must be removed prior to connecting the wires. It is crucial that the wires are trimmed to the proper length since cutting them too long could result in them becoming crushed when the plug cover is replaced. The earth wire must be the longest one to ensure it is connected prior to the neutral and line pins.
How do I install an outlet with 13amps?
The vast majority of dual cookers that use fuel in the UK are wired with a 13 amp plug. This is important because ovens can draw substantial current, while standard plug sockets only have a rating of 10 amps.
Generally speaking, new appliances must be fitted with an outlet at the time of sale. This is part of ensuring compliance with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances might not have a plug and this is the reason why the problem occurs.
The first thing to do when connecting a cooker with an existing plug socket is to ensure that the rating of the fuse in the fuse box matches that of the plug. This is vital since a fuse that is not properly sized can be dangerous.
It is also recommended to make sure that the fuse is fully installed within the cartridge and that there is no excessive movement within it. The next step is to prepare the flex that is to be used. Remove the sheathing from the flex to expose the three insulated conductors within. Utilize a utility knife to nick the sheathing just beyond the grip of the cord at the point of entry into the plug. This will not be able to penetrate the insulated conductors. The nick should be large enough that the sheathing can split and expand the nick as it is pulled back revealing the cable underneath. Cut off the excess sheathing, leaving around 40mm beyond the flex.
The flex is placed over the plug, with the earth terminal on top and the live and neutral terminals at the bottom. The sheathing on each pin is removed using colored conductors as a reference. The internal cable is then inserted to the terminal using the cord grip. If the plug has an attached cord clamp that is screw-type, let it loosen and then pull the insulation back to expose the copper wires. Connect each wire that is insulated to the appropriate terminal by using the channel inside the plug. Begin with the earth conductor and then the neutral and then the live.
What is the maximum draw of a 13 amp plug?
The maximum current draw for 13amp plugs at 3kw at 230 volts is. This is a lot of power but the standard fuse in a UK plug will not fail until the cable reaches a hazardous temperature. A defective plug or socket could result in a fire, so it's vital to keep an eye on how much power you use, especially in the kitchen.
The ceramic fuses that are used in plugtops are approximately 25mm and are suitable for mains voltage of 240V. They'll be marked with a BS kitemark or similar mark on the side and will contain sand. Alternatives to glass or plastic are available, but they should not be used in conjunction with a live plug.
The majority of dual fuel range cookers sold in the UK need to be hard-wired and are not able to plug directly into a wall socket. They are typically connected to a specific cooker ring circuit that is suitable for appliances that consume up to 20 amps.
You can check the ring circuit at your home by checking the fuse box or by asking a local electrician. Ask whether the sockets are on the same ring or if they're separate. They will also be able to tell you if there is a separate circuit to power your oven.
The size of your kitchen will be one of the main factors when you are looking to buy a dual fuel range cooker. We have a wide range of cookers that will fit any space, including small 50-60cm dual fuel models as well as huge 90cm+ double oven options from the top brands such as Rangemaster and StovesAreUs.
We also offer a wide range of multifunction electric and gas cookers. These multi-functional appliances let you cook a variety of meals, including curries, pasta, and casseroles!
Explore our complete range of Cookers in Currys online or head in-store for a look. We provide free delivery and installation at home on selected range cookers and we also offer flexible payment options. If you have any questions our team is ready to assist you - just drop us an email or give us a call. Credit is subject to status and terms & conditions apply.
What is the maximum current draw of the cooker switch?
There is a lot of confusion about the maximum current draw of the cooker switch. The truth is that most cookers are not designed to plug into a standard socket, but rather are wired hard and connected to a specific oven ring circuit. This is because they typically consume more than 20 amps when both the electric hob and gas oven are in use.
You will not find dual fuel range cookers that can be installed in a standard socket as this would pose a significant fire risk and infringe electrical regulations. A licensed electrician must always install new electrical circuits in the kitchen, connecting them to a cooker. duel fuel range should also ensure that the total load of the oven and the hob does not exceed the circuit's capacity.
The benefits of a dual fuel cooker include the responsive heat of a gas cooktop with the precision of an electric oven. They are therefore popular with both chefs and home cooks. Dual cookers with fuel ranges are ideal for trying out different cooking techniques, like searing or charring.
When purchasing a new range cooktop, you must be aware of a number of aspects, including size, functionality and cost. You will also need gas connections in your home for the appliance. If you're not sure then hire an appointment with a Gas Safe engineer to inspect your home prior to installation.
Currys' dual fuel range cookers come in a variety of models to meet all budgets. From affordable models by Indesit and Zanussi and our own Essentials collection. If you're looking for something more sophisticated, we stock a variety of top JennAir models, which feature several unique features.
It is crucial to read the user's manual prior to purchasing a dual fuel range cooker. It will provide you with specific details regarding the electrical and gas requirements. You will need gas connections in your home. A plumber might be required to set it up for you. Depending on the home you'll also have to make sure that you have a dedicated cooker ring circuit installed and signed off by a licensed electrician.